Roofing prices in Ohio, before anyone calls you.
A real roof price in 60 seconds - no salesperson.
My Roof Price Now serves Ohio. Answer a few questions and see an installed price range for roofs in about a minute — the first range needs no contact information.
Typical installed range here: $7,800–$23,200 — the estimator narrows it to your home.
Roofing materials
Architectural asphalt
Dimensional shingles that look great, shrug off weather, and last decades — the roof most homes get.
Designer / impact-resistant
Premium asphalt with a heavier profile and an impact rating — extra life and storm protection.
Standing-seam metal
Sleek concealed-fastener panels that shed snow and fire and can outlast two asphalt roofs.
Tile
Clay or concrete tile — a distinctive look that stands up to sun and time for generations.
Slate
Natural stone — the longest-lasting, highest-end roof there is, with a look nothing else matches.
3-tab asphalt
The classic flat shingle at the friendliest price — a shorter life than architectural, but easiest on the wallet.
Metal panel (exposed fastener)
Ribbed steel panels screwed through the face. The lower-cost way to a metal roof; the exposed screws are the part that needs a look every few years.
How it works
Type your address
We measure your roof’s size and pitch from satellite and show an honest range in seconds — no ladder, no appointment.
Pick material & details
Choose your material and add tear-off, complexity, and penetrations — the range tightens toward a real number.
We inspect & confirm
When you’re ready, we confirm exact measurements and decking condition on the roof, and lock in the firm price.
Why price it this way
- A real price range in about a minute. See it before you talk to anyone.
- No contact details needed to see your range — you decide when to talk to a person.
- Good, Better and Best side by side, so you can see what the upgrade actually costs.
- Priced per square from a real rate table, not a guess off a photo.
- No measuring on your side — we work the quantity out from what you already know about your home.
- The free roof inspection confirms the exact price. The range is a head start, not a bait number.
What is in your estimate
- Included: the roof material you pick — 3-tab, architectural or designer asphalt, exposed-fastener or standing-seam metal, tile or slate — and professional installation, priced per roofing square (100 sq ft).
- Included: underlayment, flashing and the accessories a roof needs — ridge, starter, drip edge and vents — at a flat figure for every job.
- Included: the permit and the disposal of what comes off, at a flat figure for every job. Your installer confirms the exact permit fee at the visit.
- Included: tear-off of the old roof, priced by how many layers are on it now, and the extra work a steep or cut-up roofline takes — which is why we ask about both.
- Included when you tell us: new chimney flashing, taking solar panels off and putting them back, skylights by the count, and new gutters by the foot.
- Settled at the visit, not in the range: the exact squares and the condition of the decking under the old roof. We confirm both at your free roof inspection, and the price we give you is the price.
- Not included: replacing rotted decking found under the old roof — shown to you before the work goes ahead — and gutter guards.
Roofs terms, explained
Measured from satellite
We pull your roof’s size and pitch from aerial imagery of your address — so you get a real number in seconds, no ladder. We confirm exact measurements on the roof.
Tear-off
Stripping the old shingles down to the deck before the new roof goes on — priced per layer removed.
Pitch & complexity
Steeper, cut-up roofs (valleys, hips, dormers) need more safety, labor, and material — that’s built into your range.
Shingle vs metal
Architectural asphalt is the go-to; designer and impact-resistant add life and hail protection; standing-seam metal is the premium, longest-lasting choice.
The questions everyone asks
Can I get a roof price without someone coming out?
Yes — type your address and we measure your roof from satellite, then show a real range in seconds. Pick a material and it tightens further. We confirm exact measurements on the roof.
Do I have to give my phone number to see a price?
No — your first range needs no contact information. You only share details when you want a tighter, detailed number.
How accurate is the estimate?
Very close once we’ve measured your roof and you’ve picked a material — that locks in most of the cost. Tear-off layers and complexity tighten it more. What a form can’t see — hidden decking rot, ventilation — is confirmed on an inspection.
What’s included in the price?
Tear-off and disposal, underlayment, flashing, the new roof, and permit — a complete installed price, not just shingles.
Why aren’t you the cheapest?
A roof done right is watertight for decades. We don’t cut the underlayment, flashing, or ventilation that make it last — that’s where cheap roofs fail.
Will my final price match the estimate?
It lands in the measured range, tightened by your answers. An on-site inspection confirms decking and ventilation — the few things satellite can’t.
What does a new roof cost in Ohio?
Use the estimator above for an installed range built from your answers and real local jobs — it takes about a minute and needs no contact information. The range narrows as you tell us more, and we confirm the exact price on-site.
A roof price from the roof you already have
A roof is priced per square (a hundred square feet) by material: three-tab or architectural asphalt, designer shingles, standing-seam metal, tile or slate. Type your address and the estimate measures your roof from satellite imagery, pitch included, so you see a real range without anyone on a ladder. Underlayment and flashing, the permit and disposal, chimney flashing, skylights, a solar detach-and-reset and new gutters are separate lines.
The free inspection walks the roof: the decking, the valleys, the penetrations, the ventilation, and whatever the satellite could not see. That is when the range becomes the exact price.
We are MyPriceNow, and this page is our working example of a Roofing dealer’s estimator. Price your job, ask for a roof inspection, and we connect you with a local roofer who does the roof inspection and the work. Roofs get bought under pressure, after a storm and a knock on the door. The number on this page is for before that.
Where we work
My Roof Price Now serves Ohio. We confirm the exact price on-site.